MAHA LPS 3000 Operating Instructions Manual Download Page 92

Page: 92 / 115

BA052301-en

LEVEL 4

Vehicle-
data

•

Use this button to display the vehicle data.

RPM-
settings

•

Use this button to display the RPM setting.

P-drag
wizzard

•

Use this switch button to smooth the power curve (P-drag) by
extrapolation and then to store.

Finish
wizzard

Curve Selection

1 Use the button <F7 CURVE SELECTION>.

→

The following screen appears:

2 Use the keys 1 to 4 or the appropriate

buttons to blend in the individual
performance curves.

3 Using the keys 5 to 7 or the appropriate

buttons a max. of 3 additional
measurements (torque and engine power),
if loaded, can be blended in and out in the
background.

4 A max. of 3 additional curves can, if loaded,

be blended in or out in the background with
the selection boxes or the appropriate
buttons.

5 With <F7 MAX. VALUES> the max. values

are re-displayed.

Summary of Contents for LPS 3000




















































































































Search results

Summary of Contents for LPS 3000

Reviews:

MAHA LPS 3000, Operating Instructions Manual, Page: 92 / 115

Search results

Summary of Contents for LPS 3000

Reviews: