MAHA LPS 3000 Operating Instructions Manual Download Page 68

Page: 68 / 115

BA052301-en

Zoom function

1  Press and hold left hand mouse key.
2  Frame the desired cutout in the diagram.
3  Release the left hand mouse key.

→

The diagram cutout will be enlarged by a

maximum factor of 5.

4 Use the <F6 ZOOM OUT> key to reduce the

original picture size again step by step.

Cursor function

1 Press the button <F5 CURSOR>.

The cursor is blended in.

2 Press and hold left hand mouse key.
3 Move the cursor to the desired diagram

point.

→

The measurement values are shown in

the right

–

hand column.

4 Use the <F5 CURSOR OFF> to blend out the

cursor.

Insert comment

1 Press the right hand mouse key.

A window opens.

2  Enter comment.
3  Confirm with <RETURN> .
4  Press and hold right hand mouse key to

move the comment.

Delete comment

1 Select the desired comment with the right

hand mouse key.

2 Delete comment with <DEL> .
3 Confirm with <RETURN>.

Up to 5 comments with a max. of 40 characters can be inserted into the diagram.

Summary of Contents for LPS 3000




















































































































Search results

Summary of Contents for LPS 3000

Reviews:

MAHA LPS 3000, Operating Instructions Manual, Page: 68 / 115

Search results

Summary of Contents for LPS 3000

Reviews: