8
BA320101-en
•
The main switch serves as emergency stop switch. In case of emergency turn it
to "0".
•
Protect the lift against unauthorized usage by padlocking the main switch.
•
Protect all parts of the electrical equipment from humidity.
•
Use caution with operating vehicle engines. Danger of poisoning!
•
When removing heavy vehicle components, the centre of gravity can change. In
such circumstances appropriate action must be taken as required.
•
Residual risk: Tripping over runways of surface mounted lifts, tripping over
tools.
Pos: 21 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S icherheitsvorschr iften für Servicearbeiten @ 6\mod_ 1174482270640_75.d ocx @ 76850 @ 2 @ 1
1.8
Safety Instructions for Servicing
Pos: 22 / Technische Dokumentation/Hebetechnik/00 HBZ Alle/Inhalte/Inhalt: S icherheitsv orschriften für Servicearbeiten HBZ_ 12pt @ 46\m od_1481283945452_ 75.docx @ 2797338 @ @ 1
•
Use personal protective equipment.
•
Service work must be done by authorized service technicians.
•
Turn off and padlock the main switch before doing any repair, maintenance or
setup work.
•
The system must be unpressurized during maintenance work.
•
Work on pulse generators or proximity switches must be done by authorized
service technicians.
•
Work on the electrical equipment must be done by service technicians or
qualified electricians.
•
Ensure that ecologically harmful substances are disposed of in accordance with
the appropriate regulations.
•
Do not use high pressure or steam jet cleaners. Do not use caustic cleaning
agents.
•
The lift's safety devices must be set by authorized service technicians.
•
Do not replace or override the safety devices.
Pos: 23 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S icherheitseinrichtungen @ 6\mod_ 1174483324765_ 75.docx @ 77103 @ 2 @ 1
1.9
Safety Features
Pos: 24 / Technische Dokumentation/Hebetechnik/32 S tempel-Hebebühnen/0001 Stempel-Hebeb ühnen Alle/Inhalt/Inhalt: S icherheitseinr ichtungen Stempel-H BZ Zahnstangen @ 28\mod_ 1335171511705_75.d ocx @ 1588569 @ @ 1
Main switch
The main switch is used to turn the lift on and off or as an emergency stop switch.
In switch position "0" the system is disconnected at all poles from the power plant
network. It is possible to prevent unauthorised use of the lift by locking the main
switch with a padlock.
Dead man control
Control keys only function when the key is held down.
Synchronising shaft
The synchronising shaft ensures equal lifting height and lifting speed for both
cylinders.
