17
BA320101-en
Pos: 67 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/V/Überschrift 1.1: Vorbereitungen @ 8\m od_1204639543920_ 75.docx @ 155816 @ 2 @ 1
5.5
Preparations
Pos: 68 / Technische Dokumentation/Hebetechnik/32 S tempel-Hebebühnen/2701 E S SQ UA RE II 3.0/BA/Inhalt: 3227 Vorbereitungen @ 28\mod_ 1337780371750_ 75.docx @ 1600199 @ @ 1
Swing Arm Superstructure
1 Fully lower the lift. Swing arms sideways to clear the approach path.
2 Slowly center the vehicle between the cylinders.
3 Apply the parking brake to prevent the vehicle from rolling off.
4 Position all four adapters under vehicle manufacturer's recommended lift
points.
5 The support discs are height-adjustable. Make sure they evenly engage the
vehicle frame.
6 Leave the vehicle and the danger zone around the lift.
H-Shaped Superstructure
1 Fully lower the lift. Slowly drive the vehicle over the supports so that these are in
center between the axles.
2 Apply the parking brake and use chocks to prevent the vehicle from rolling off.
3 Lift the extensions at their front edges and position them under the vehicle
manufacturer's recommended lift points.
IMPORTANT: Make sure the extensions snap into place!
4 Position spacer blocks under the lift points.
5 Leave the vehicle and the danger zone around the lift.
Pos: 69 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/H/Überschr ift 1.1: Heben @ 6\m od_1180960375312_ 75.docx @ 95073 @ 3 @ 1
5.6
Raising
Pos: 70 / Technische Dokumentation/Hebetechnik/00 HBZ Alle/Inhalte/Inhalt: Heben A lle HBZ_ 12p t @ 27\m od_1327996945113_ 75.docx @ 1523675 @ @ 1
1 To raise the lift, push and hold the RAISE LIFT button, until the desired lifting
height is reached.
The lift movement stops when the button is released or the upper end stop is
reached.
Pos: 71 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S enk en @ 6\mod_ 1180960432671_75.d ocx @ 95086 @ 3 @ 1
5.7
Lowering
Pos: 72 / Technische Dokumentation/Hebetechnik/32 S tempel-Hebebühnen/2301 ZS SQ UA RE II/BA/Inhalt: 3223 Senken ZS S QUARE I+II @ 27\mod_1327997000041_ 75.docx @ 1523719 @ @ 1
1 To lower the lift, push and hold the LIFT DOWN button until the desired height
is reached.
The lift movement stops when the button is released, the CE safety stop is
reached or the lower end stop is reached.
2 To lower the lift to bottom position after reaching the CE safety stop, release
the LIFT DOWN button and push it again.
Pos: 73 /----- Format-----/MAN UELLER UM BRUCH Seitenumbruch @ 0\m od_1134403577687_ 0.docx @ 1277 @ @ 1
