MAHA DUO CM Series, Operating Instructions Manual

Page: 45 / 45

45
BA082901-en
7 Service Lifetime
In its standard version, this product is designed for 22,000 load cycles based on
EN 1493. The maximum period of normal use in relation to the possible product life
expectancy shall be evaluated and scheduled by a qualified person during the annual
safety inspection.
8 Dismantling
Decommissioning and dismantling of the equipment may be done only by specially
authorized and trained personnel provided by the manufacturer, licensed dealers or
service partners.
9 Disposal
Pay attention to the product and safety data sheets of the lubricant used. Avoid
damage to the environment. Should a disposal of the device be necessary it must be
done in adherence with locally applicable legal regulations regarding environmental
protection. Remove all materials properly sorted out and bring them to a suitable
waste disposal service. Collect operating materials such as grease, oils, coolant,
solvent-based cleaning fluids etc. in suitable containers and dispose of in an
environmentally protective manner.
Alternatively, you may take the equipment to a specialised waste management plant
to ensure that all components and operating liquids are properly disposed of.
10 Contents of the Declaration of Conformity
MAHA Maschinenbau Haldenwang GmbH & Co. KG
herewith declares as a manufacturer its sole responsibility to ensure that the product
named hereafter meets the safety and health regulations both in design and
construction required by the EC directives stated below.
This declaration becomes void if any change is made to the product that was not
discussed and approved by named company beforehand.
Model: DUO CM / R-AS40/50CM
Designation: Scissors Lift; Rated Load Capacity 4000/4200/5000/5500 kg
Directives: 2006/42/EC; 2014/30/EU
Standards: DIN EN 1493; DIN EN 60204-1