24
BA082901-en
5.10
Manual Lowering of the Lift
5.10.1
Important Notice Regarding Manual Lowering
WARNING
Perform actions in the sequence described! The sliding shoes must only be at-
tached after the seat valves have been mechanically disabled.
If the lowering procedure needs to be interrupted, first remove the sliding shoes
and then enable the cylinder’s seat valves. The latches are now in the safety posi-
tion.
If the lift and the wheel-free jack need to be lowered manually, first lower the
wheel-free jack to the home position. See section 'Manual Lowering of the Wheel-
Free Jack'.
After manual lowering, restore the valves to their previous operating state.
5.10.2
Sequence of Actions for Manual Lowering
CAUTION
: Ensure that actions are performed in this sequence!
1 Open the seat valves (A) of the main cylinders.
2 Place the sliding shoes (B) underneath the latches.
3 Leave the hazard zone.
4 Actuate the release valves.
5 Close the seat valves of the main cylinders.
6 Remove the sliding shoes.
See in-depth description on the following pages.
Latch engaged
Latch disengaged
A
B
Summary of Contents for DUO CM Series
