MAGUIRE Weigh Scale Blender 4088 TSC, Installation Operation & Maintenance

Page: 79 / 143

79
Parameter Settings Printout
To print a copy of all internal parameters:
A USB Flash Drive must be connected to the USB port on the controller. Up to 13 lists will print, a
General list and 12 component lists. Only components that are turned "on" will print. Four
columns will print, RAM; ROM; 200 and 900 series tables; and EEPROM. Identifying headings
print above each column. Other print options can be sent to USB such as Print Totals, Print Alarm
History, Print Cycle History, Print Parameters, Print Alarm and Events, and the option to Print All
to USB.
Press Display will prompt for a password. (default: 22222) Then press:
Press
System Configuration
Display will show the System Configuration categories.
Press
Diagnostics
Display will show System Diagnostics Options
Press
System Print Options
Display will show System Print Options:
Print Totals, Print Alarm History, Print Cycle History,
Print Parameters, Print Alarm and Events, Print All.
Press
Print Parameters
System will print parameters to USB to a file labeled:
PRINTER.TXT located in a folder named “maguire”.
Press
To save and exit or press the red X to cancel
and exit.