MAGUIRE Weigh Scale Blender 4088 TSC, Installation Operation & Maintenance

Page: 20 / 143

20
Home Screen
Title Bar
Component
Setpoint
Hopper number
Name
Type
Hoppers
9 - 12
START/STOP
Button
Specialized
Operations
Weigh Bin Mix Chamber High / Low Limits Print Center Nav bar
Title Bar - The title bar displays: Model, current Operating Mode (blender, dispenser or Totalizer), date and time, Ethernet
and USB status. Operating Modes are: WAITING, blender is idle (stopped or mix chamber sensor covered).
Navigation Menu – (Nav bar) Located along the right side of the screen, these buttons allow quick navigation to
frequently used and top-level screens. The middle three buttons are soft buttons that can be changed or removed.
Component - This area displays the current configuration of each component (hoppers and feeders), component setpoint,
material name, component type, visible alarms, dispensing indicators (dispensing component hopper number turns yellow
when dispensing). Touch any anywhere on a hopper to access more detail on the individual component.
High / Low
Limits , when enabled by the SE or SL component parameters, allow setting a high or low limit on the component.
Hoppers 9 - 12 - The main Home Screen displays hoppers 1 through 8. Hoppers 9 through 12 are displayed on a second
screen accessible by pressing this button. To return to viewing hoppers 1- 8, press this button again. During operation, the
display will automatically toggle to show hoppers that are currently operating.
Weigh Bin – Displays current throughput per hour, current weight in weigh bin, the current dispensing component (hopper
number and type displayed when that component is dispensing), percentage completed of the cycle (green area) and the
portion that is currently dispensing displayed in red. The weigh bin dump flap status (red when closed, green when open).
Mix Chamber – The mix chamber displays the mix chamber level sensor (yellow when cover, gray when uncovered) and
mix motor status (idle or rotating). Below the mix chamber the Flow Control Valve (FCV) status is displayed (red when
closed, green when open).
Start / Stop Button - Main Start and Stop Control Button of the Blender. Also see Automated Control.
Specialized Operations Buttons - When enabled and made visible Specialized Operations Buttons allow access to
specific functions of the blender including View of current totals, Internal Recipe Database, Batch Mode, Tag Information
and FAST mode.