Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST, Instruction Manual

Page: 13 / 47

M A G U I R E P R O D U C T S , I N C .
13
G R A V I M E T R I C A U G E R F E E D E R

Start Up Procedure
1. Turn POWER ON:
The opening screen displays for 5 seconds and shows
your current firmware and bootloaders software versions
for the touchscreen controller and I/O, in the information
window.
The display then shows the Main Home Screen of the
MGF. Depending on your Mode of Operation, the Main
screen will either display Shot Weight (grams) for Cycle
Mode or Pounds or Kilograms per hour for Continuous
Mode.
Adjustments
Depending on your selected Mode, the display will show SHOT/WT or LBS/HR (KG/HR) .
To adjust this value, follow these instructions:
Press field
LBS/HR (KG/HR)
or
Display will show the Per Hour
Rate or Show Weight Screen
showing the current setting. Use
the keypad to set a new rate or
shot weight.
Press
Press
Saves and loads new setting and return to Home.
Cancels the new setting, revert to original settings and
returns to the Home Screen.
LDR – Let Down Ratio -
To adjust this value, follow these instructions:
Press field
LDR
(Let Down Ratio)
Display will show the Let Down Ratio
screen showing the current LDR setting.
Use the keypad to set a new LDR. The
decimal is hard coded to 100
ths of a %.
Press
Press Saves and loads new LDR setting, return to Home.
Cancels the new setting, revert to original settings and
returns to the Home Screen.