62
Magtrol Model DSP7000 Dynamometer Controller
Chapter 6 – Manually Controlled Operation
OPERA
TION
5. After the preload function has been enabled, and the preload value has been set, the set
point the open loop will be initialized to 0.00 % and preload settings is saved to non-volatile
memory.
6. If Scale D button is pressed and the preload function is disabled, the last preload percentage
value will be displayed in set point.
6.7
how to set and reset tare funCtion
6.7.1
S
eTTing
THe
T
are
f
unCTion
1. Press ShIFT button.
2. Press TARE button.
3. “*” indicator will be displayed as in
Figure 6–6 Tare function enabled
.
POWER
BRAKE STATUS
SET POINT
SET POINT
P
I
D
TORQUE
SPEED
USER DISPLAY
0.000 W
OFF
0.000 OZ.IN
0000
0%
0% 0%
0
*
Figure 6–6 Tare function enabled
Note:
If the tare value is greater than 10% of full scale, the tare function
cannot be enabled.
6.7.2
r
eSeTTing
THe
T
are
f
unCTion
1. Press ShIFT button.
2. Press RESET TARE button.
3. “*” indicator will disappear.