Appendix A - Technical Specifications
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 59 of 60 (
D998200129-10
)
DynaPro Go Technical Specifications
Communications Characteristics
Data Connections:
TCP/IP over 802.11 wireless
Micro-USB, implements USB 1.1 and USB 2.0
BLE and Bluetooth wireless (select models)
Wireless Range(s):
Wireless network: 150 ft. (45m)
NFC: 1.6 in. (40mm)
Electrical Characteristics
Battery Capacity:
1700 mAh nominal (rated)
Battery Charge, Powered Off:
1 year (new device)
*
Battery Charge, Standby:
6 hours (new device)
*
Battery Charge, Active:
Power Inputs:
micro-USB connector
Charging cradle contacts
Maximum Current Draw:
1A
Voltage Requirement:
5VDC
Battery Type:
Lithium Polymer rechargeable for main power
Lithium coin cell for backup
RF Frequencies and Power:
802.11 Wireless:
Average Power Radiated: 1.02mW (0.08 dBm)
Conducted Power = 97.7mW (19.89 dBm)
Frequency range 2400 MHz to 2497 MHz
Contactless Reader:
Radiated Power: 10.34dBm
Frequency range: 13.553 MHz to 13.567MHz
Flash Memory:
256 MBit
Software Characteristics
Tested Operating System(s):
iOS 7.1 and later
Android 4.4.2 and later
Windows 7, Windows 8.1, Windows 10
Environmental Tolerance
Operating temperature:
32°F to 113°F (0°C to 45°C)
Operating relative humidity:
10% to 90% without condensation at 23 °C
Storage temperature:
14°F to 140 °F (-10 °C to 60 °C)
Storage relative humidity:
5% to 90% without condensation