MAGSTIM NEUROSIGN V4, Service Manual, Page: 27 / 50

The Magstim Company Ltd.©
27
NOP20-EN-03
Bolt
b. Touch screen DCU removal
The SD card must be removed prior to returning the touch screen DCU for service or
repair in order to comply with data protection requirements
If the SD card is not removed prior to shipping, the equipment will be returned
untouched, at the expense of the customer. You will be advised to remove the SD
card and re-ship the equipment. The SD Card should be securely stored to protect
Retaining
Screw
SD card
Housing
patient data. Do not send the SD card with the
equipment.
i. SD card removal
• Remove the retaining screw from the rear
panel of the touch screen DCU ( right ).
• Remove rear panel by sliding downwards
(indicated by an arrow).
• Gently push the SD card in to release the SD
card from its housing beneath the rear panel
(
right ). The SD card can now be removed.
• Replace the rear panel and secure with the retaining screw.
ii. Touch screen DCU removal
!Note: to avoid damage, the touch screen DCU should be supported before the screws
are removed.
• Disconnect all cables from the touch screen DCU.
• Remove the four bolts from the upper spine bracket ( below ) using a 3 mm allen
key.
• Lift the touch screen DCU away from the upper spine