MAGSTIM NEUROSIGN V4, Service Manual, Page: 15 / 50

The Magstim Company Ltd.©
15
NOP20-EN-03
1.4 Stimulator Pod
The stimulator pod serves as a connection point for the stimulating probes and allows
for two stimulating probes to be connected simultaneously. This can be useful when
both precise and wide-field stimulation is required. The stimulator pod also serves to
reduce the length of cable attached to the stimulating probes, making them easier
to handle.
27. Mounting Clip
A mounting clip is located on the side
of the stimulator pod so that it can be
attached to the side rail of the operating
table.
28. Primary Stimulator Sockets
The primary stimulating probes should
be connected into the corresponding
coloured sockets.
29. Stimulator Pod Socket
The stimulator pod connection lead
should be attached to the pre-amplifier
socket (see page 14).
Primary
Stimulator
Sockets
Stimulator
Pod Socket
Mounting
Clip
27.
28.
29.