22
J1939 VIEWER
This screen provides a hexadecimal dump of the messages received on the CANbus. This viewer displays the raw
data. To see the decoded data, use the “Db Viewer”.
Button 1
freezes the display while button 2
shows CANbus data statistics screen.
ENGINE CONFIG
This screen displays the engine configuration information received from the ECU. Button 2
selects the next page
of engine configuration while button 1
selects the previous page.
J1939 SETTINGS
This screen allows adjustments specific to the J1939 data link.
ENGINE SOURCE
Selects which source the display listens to for gauge data. Every device on a J1939 network has a unique address
(in the range 0-254) to which the display can choose to listen. The display listens to a single data source; usually
the ECU at address 0.
Note:
Incorrectly configuring the “Engine Source” address will result in no data available for display.
Stop
Stats
