13
1.
MANUAL HOLDER:
Storage for operator manuals.
2.
EMERGENCY STOP SWITCH:
Activate the emergency stop switch by pushing the red button in until it locks
down. Only use when the pump must be shut down immediately. For any other shut down, follow the procedure
on
3.
CONTROL PANEL:
Controls and indicators for pump operation.
4.
CENTRAL LIFT POINT:
Used for lifting the pump.
5.
FUEL TANK DRAIN:
Drain for fuel tank for cleaning and/or maintenance.
6.
TIE-DOWN RINGS:
Used to secure the pump for storage and/or transport.
7.
FUEL FILL PORT:
Lockable port for filling the DIESEL fuel tank.
8.
PRIMING PORT:
Used to fill the pump volute with water.
9.
PUMP OUTLET (DISCHARGE) PORT:
Opening for discharge of liquids from the pump. Fittings can be threaded
or bolted to the pump flange.
10.
PUMP VOLUTE (HOUSING):
Cast-iron housing for the pump mechanical components.
11.
PUMP INLET (SUCTION) PORT:
Opening for intake of liquids into the pump. Fittings can be threaded or bolted
to the pump flange.
12.
PUMP CLEANOUT COVER:
Provides access to pump internals for cleaning and/or maintenance.
13.
PRESSURE RELIEF VALVE:
Safety device that will allow excess pressure to vent safely from the pump volute.
14.
DRAIN PLUG:
Allows for complete draining of the pump volute for storage and/or maintenance.
15.
REAR LEVELING JACKS:
Used to level the rear of the pump on rough or uneven ground.
16.
FORK LIFT POCKETS:
Used for lifting the pump.
17.
FRONT LEVELING JACK:
Used to level the pump on rough or uneven ground and to aid in attaching the pump
to a tow vehicle.
Note:
Use hoses and fittings that are specifically designed and sized for this type of equipment.
