17
1.
CONTROL PANEL LIGHT (Optional)
2.
MAGNUM DIGITAL CONTROLLER (MDC):
Refer to
“Magnum Digital Controller (MDC)” on page 18
.
3.
CONTROL PANEL LIGHT SWITCH (Optional):
Operates optional control panel light.
4.
INTERIOR LIGHT SWITCH (Optional):
Operates optional interior light.
5.
20A CIRCUIT BREAKERS:
Disconnects power to the 120V GFCI outlets.
6.
50A CIRCUIT BREAKERS:
Disconnects power to the 120/240V twist-lock outlets.
7.
REMOTE START TERMINAL BLOCK:
Allows the generator to be started from a remote location with a dry-
contact closure switch when the generator is used for standby or remote power.
8.
120/240V TWIST-LOCK CONVENIENCE OUTLETS:
Allow for connecting additional loads or equipment to the
generator.
9.
120V GFCI DUPLEX CONVENIENCE OUTLETS:
Allow for connecting additional loads or equipment to the
generator.
10.
ENGINE ACCESSORY CONNECTION:
Powers the battery charger and other engine accessories.
11.
GENERATOR GROUND CONNECTION LUG:
Allows connection to a good earthen ground per any local, state
or National Electric Code (NEC) guidelines before starting the generator.
12.
GENERATOR OUTPUT CONNECTION LUGS:
Allow appropriate loads to be wired directly to the generator.
13.
CAM LOCK CONNECTORS (Optional):
Series 16 taper nose 400A/600V cam locks are connected here. Refer
to
“Generator Cam Lock Connections Option” on page 36
.
14.
VOLTAGE SELECTOR SWITCH:
Mechanically changes the connections between the generator output leads
and the connection lugs and the optional cam lock connectors on the main control panel.
15.
MAIN CIRCUIT BREAKER:
Disconnects power to the connection lugs and the optional cam lock connectors
(items 12-13). It
WILL NOT
disconnect power to the convenience outlets when the engine is running.
