Maintenance and Service
24
312001P
Maintenance and Service
Caring for Sprayer
Keep sprayer and all accesso-
ries clean and in good working
order.
To avoid overheating motor,
keep vent holes in shroud clear
for air flow. Do not cover sprayer
while spraying.
Paint Hoses
Check hose for damage every time you spray. Do
not attempt to repair hose if hose jacket or fittings
are damaged. Do not use hoses shorter than 25 ft
(7.6 m). Wrench tighten, using two wrenches.
Tips
•
Always clean tips with
compatible solvent and
brush after spraying.
•
Tips may require
replacement after 15 gal-
lons (57 liters) or they
may last through 60 gal-
lons (227 liters) depend-
ing on abrasiveness of paint.
•
Do not spray with worn tip.
Pump Packings
When pump packings wear,
paint will begin to leak down
outside of pump.
•
Replace pump packings at
first sign of leaking or addi-
tional damage could occur.
•
Purchase a pump repair kit
and install according to
instructions provided with
kit.
•
Consult a Graco/M
AGNUM
authorized service center.
NOTICE
Protect the internal drive parts of this sprayer
from water. Openings in shroud allow cooling of
mechanical parts and electronics inside. If water
gets into these openings, the sprayer could mal-
function or be permanently damaged.
ti3388a
ti9355b
ti2055a
ti9356a
Summary of Contents for 261815
Page 83: ...Notes 312667H 51 Notes ...
