©
2009 Magnum Energy Inc
Page 42
B.1 Optional
Equipment/Accessories
The following Magnum Energy components are available for use with the MS-PAE Series inverter/
Charger. Some of these items are required depending upon the intended use of the inverter.
MMP Series Enclosures
The MMP175-30D. MMP175-60S, MMP250-30D and MMP250-60S enclosures are for single inverter
applications. The MMP Series enclosures have been speci
fi
cally designed to combine all of the major
components required for a renewable energy system - inverter/battery disconnect, AC overcurrent
protection, grounding connections and a full system inverter bypass switch as a convenient way to
isolate the inverter for battery maintenance - into a single, easy to install pre-wired enclosure.
MP Series Enclosures
The MPSL, MPSH, MPDH enclosures have been speci
fi
cally designed to combine the MS-PAE inverter’s
when con
fi
gured for parallel operation. The MP enclosures feature convenient front mounted AC
and DC connections and easy panel operation using the optional ME-RTR router. Choose the MP
model based on your power capacity needs. Each model is expandable, start with the base model
and just one inverter and in the future add another inverter - up to four inverter’s total depending
on your model - with ease, using the MPX expansion boxes.
Router Control Display Panel
The ME-RTR Router Control Display Panel provides operating information and setup/troubleshooting
capabilities for multiple Magnum inverters. Allows up to four MS-PAE inverter’s to be connected
in a parallel con
fi
guration for increased inverter power.
Advanced Remote Control Display
The ME-ARC allows the advanced features of the MS-PAE inverter to be con
fi
gured. This LCD re-
mote display also provides advanced monitoring/troubleshooting and includes a FAVS button to
access your favorite features quickly.
Standard Remote Control Display
The ME-RC Remote Control is simple to use; an easy-to-read LCD screen and “at a glance” LEDs
display complete inverter/charger status. Soft keys provide simple access to menus and a rotary
encoder knob allows you to scroll through and select a wide range of settings such as Inverter
ON/OFF, Charger ON/OFF, Shore Power Breaker Setting, AGS Control, Meter Button, Setup and
Tech menus.
Auto Generator Controller
The ME-AGS-N (Rev 5.0) is designed to automatically start your generator based on low battery
condition or high temperature.
The AGS controller includes an input voltage jumper (for 12, 24
and 48 volt battery banks) and a 4-position DIP (Dual In-line Package) switch which provides
the ability to change the relay timing con
fi
gurations to allow compatibility with a wider range of
generators.
Adjustable settings include starting the generator based on battery voltage, Time of
day, battery State of Charge or High Temperature. Includes “Quiet Time” with an easy to set clock.
AGS settings do not interfere with the manual start / stop operation of the generator.
Battery Monitor
The Battery Monitor Kit (ME-BMK) is a single battery bank amp-hour meter
that monitors the condi-
tion of the battery and provides information to let you know how much energy you have available
and let you plan your electrical usage to ensure the battery is not being over-discharged.
Fuse Block/Fuses
The Magnum Fuse/Fuse-blocks (TFB-XXX) are used to protect the battery bank, inverter, and
cables from damage caused by DC short circuits and overloads. They include a slow-blow, high
current Class-T fuse with mounting block and protective cover. The fuse sizes are available in 125,
200, 300 and 400 amps.
Appendix B - Optional Equipment/Accessories
