© 2010 Magnum Energy, Inc.
4.0 Maintenance and Troubleshooting
37
Resetting the Inverter
Under some fault conditions (i.e., an internal fault), the inverter will
need to be reset.
To reset the inverter:
Press and hold the Power ON/OFF pushbutton for approximately
15 seconds, or until the status LED comes on and
fl
ashes rapidly
(see Figure 17).
Release the Power ON/OFF pushbutton once the rapid
fl
ashing
has begun. The status LED will go off.
Press the Power ON/OFF pushbutton again to turn the
inverter on.
Info:
The Power ON/OFF pushbutton is a small
momentary
type switch which operates by lightly
pressing and releasing.
1.
2.
3.
S ta tu s L E D
In d ica to r
P o w e r ON/OFF
p u sh b u tto n
Figure 17, Resetting the Inverter
