© 2010 Magnum Energy, Inc.
Wiring Guidelines
Before connecting any wires, determine all wire routes to and
from the inverter throughout the RV, vehicle, or boat.
Conductors passing through walls or other structural members
must be protected to minimize insulation damage such as cha
fi
ng,
which can be caused by vibration or constant rubbing.
Always check for existing electrical, plumbing, or other areas of
potential damage prior to making cuts in structural surfaces or
walls.
Make sure all wires have a smooth bend radius and do not be-
come kinked.
Both AC and DC overcurrent protection must be provided as part
of the installation.
•
•
•
•
•
Figure 10, MMS1012-G Model Inverter/Charger Dimensions
2.0 Installation
~ 16
5/8
"
(16.59 ")
~ 6
¾
” (6.71 ")
10 "
~ 5
⅛
"
(5.125 ")
~ 4
⅝
”
(4.625 ")
~ 5 "
M ounting holes x 4
[
¼” (0.25") diameter
]
~ 7
½
” (7.51 ")
~ 8
7/16
” (8 .41 ")
13
