Pedestrian Pivot Barrier
MPP-112 / MPP-122 / MPP-132 / MPP-212 / MPP-222
Assembly and installation
36
5817,0016EN / Version 00
7.4 Unpacking
The individual packages are packed according to the expected
transport conditions. Only environment-friendly materials have
been used for the packaging.
The packaging should protect the individual components against
transport damages, corrosion, etc. up to the assembly. Therefore
do not destroy the packaging and remove only directly before
assembly.
1. Unpack the pedestrian barrier.
2. Align pedestrian barrier upright.
3. Separate material according to type and size and continue to
use them after recycling.
7.5 Mounting pedestrian barrier right to a wall –
MPP-212 and MPP-222
The pedestrian pivot barriers MPP-212 and MPP-222 can be
installed directly at a wall. For this, you need to move the cover
attached via hinges as removable cover.
1. Open cover (3 locks).
2. The cover is earth-protected with a protective earth conductor
(yellow-green wire). Undo the protective earth from the cover.
3. Remove the hinge screws. Hold on to the cover.
4. Remove
the
cover.
5. Mount the rubber buffers. The rubber buffers are included in
delivery.
6. Earth cover by the protective earth. Mount the protective earth
at the cover.
DANGER!
Danger to life when the protective earth conductor is not
connected to the cover.
7. Attach
cover.
8. Close
cover.
