Magneti Marelli 007950006900, Owner'S Manual

Page: 13 / 128

English
13
LOAD ERROR
*The tested battery is bigger than
2000CCA/SAE or 200AH. Or the clamps are
not connected properly. Please fully charge the
battery and retest after excluding both previous
reasons. If reading is the same, the battery
should be replaced immediately.
LOAD ERROR
12.SOC & SOH Display: Press directional keys to see SOC & SOH:
GOOD & PASS
SOC: xx.xx V
ˍˍˍˍˍˍˍˍˍˎ
90%
GOOD & PASS
SOH: xxxx CCA/SAE
ˍˍˍˍˍˍˍˍˍˎ
90%
13.Test Code:
Press <Enter> to get Test Code.
CODE
xxxxxxxxxxxx
14.
3UHVVWKHŻŹNH\WRVHOHFWUHVXOWSULQWLQJ
YES or NO. Press «ENTER» to confirm your
choice.
PRINT RESULT?
YES/NO
15.Press «ENTER» return to MAIN MENU or remove the test clamps from the
battery posts after completion of testing batteries to end test.
SYSTEM TEST:
1.
6HOHFW³6<67(07(67´IURPWKHPDLQPHQX SYSTEM TEST
xx.xx V
2. Turn off all vehicle accessory loads such as light,
air conditioning, radio, etc. Before starting the
engine.
TURN OFF LOADS
START ENGINE
3. When the engine is started, one of the three results will be displayed along
with the actual reading measured.
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu