Flex 8EX EU System Instruction Manual
March 2012
8 of 37
7
1
4
2 3
5 6
8
CHANNEL
7
1
4
2 3
5 6
8
4. Function Settings
A. Transmitter Handset
1. System Channel Settings
(Fig. 07)
Set the transmitter channel by adjusting the channel dip-switch located on the backside of the
transmitter encoder board (refer to Fig. 07 above). Only the first six (6) positions are used for
channel programming (refer to Fig. 08 below). The system channels table located on page 26
illustrates which dip-switch setting corresponds to which channel. Once the transmitter channel
is altered, make sure to change the receiver channel as well. The channel on both the
transmitter and receiver must be identical in order for the system to work. To change the
receiver channel please refer to page 17.
Example:
Top slot
→
“1”
Bottom slot
→
“0”
(Fig. 08)
The above dip-switch setting
“1 0 0 1 0 0”
corresponds to “channel 36” in the system channels
table on page 26.
