6/2/2010
Page 18 of 25
Electrobar 8-Bar Instruction Manual
005-1044-R8
Chapter 10.0: Transfer Caps
10.1: Install conductor support brackets with anchor clamps as shown (see separate instructions for
anchor clamps).
10.1.(a):
Drill ends of conductor bars with 19/64” drill to accommodate transfer cap pins.
10.1.(b):
Tap in transfer cap with rubber mallet.
10.1.(c):
File or de-burr any rough edges along collector tracking surfaces.
10.1.(d):
Align opposing conductor runs and anchor, to prevent movement during vibration or
collector transfer.
Figure H
8-Bar Transfer Cap
Support Bracket
Anchor Hanger
1/4”Max Cap
Transfer End Cap
Anchor Hanger
Anchor Hanger
Support Hanger
3”Max
