6/2/2010
Page 3 of 25
Electrobar 8-Bar Instruction Manual
005-1044-R8
Chapter 1.0: Warnings and Cautions
Many tests and procedures outlined in this manual involve exposure to components that operate
at potentially lethal voltage levels. To eliminate this hazard, service personnel must ensure that
the incoming three-phase AC power has been disconnected, locked out, and tagged.
DISCLAIMER OF WARRANTY
Magnetek, hereafter referred to as Company, assumes no responsibility for improper use of
supplied product by untrained personnel. Product should only be installed or repaired by a
trained technician who has read and understands the contents of this manual. Improper
installation or service can lead to unexpected, undesirable, or unsafe operation or performance.
This may result in damage to equipment or personal injury. Company shall not be liable for
economic loss, property damage, or other consequential damages or physical injury sustained by
the purchaser or by any third party as a result of such operation or service. Company neither
assumes nor authorizes any other person to assume for Company any other liability in connection
with the sales or use of this product.
PRODUCT WARRANTY INFORMATION
For information on Magnetek’s product warranties by product type please visit
www.magnetekmh.com.
©2010 MAGNETEK
All rights reserved. This notice applies to all copyrighted material included with this product,
including, but not limited to, this manual and software embodied within the product. This manual
is intended for the sole use of the persons to whom it was provided, and any unauthorized
distribution of the manual or dispersal of its contents is strictly forbidden. This manual may not
be reproduced in whole or in part by any means whatsoever without the expressed written
permission of Magnetek.
