Magnetar UDP900, User Manual

Page: 53 / 64

RS-232 Control Protocol
48
Faults Potential Causes Solutions Remarks
The recording side of the disc is
dirty
Take the disc out and clear the dirt/stain or fingerprint off the disc.
The disc is put upside down
Take the disc out to make sure that the printing side will be upward,
while the recording side will be downward.
The laser head condensates
Open the player and take the disc out.
Keep the player open for one hour.
Remote control
malfunctions
Remote control is too far away Use remote control within effective distance
Battery is low Replace batteries
Temporary
malfunctions
The disc is scratched on the
surface or damaged
Replace the disc
Some functions don’t work
during playing
Try again after the player fully stops playing
Interference of other devices
Power off other devices to inspect their interference. Then, replace
the devices which interfere with the player or put them in other
places.
Some set menu
options become
gray
While a disc is being played,
some set options cannot be
altered. Certain set options
and others would be mutually
exclusive
Try setting the menu again after the player fully stops playing and
the disc pops out.
“Connection
test” fails
The player cannot be connected
to the Internet.
Check if the router is connected to the Internet. Try restarting the
modem and the router. If possible, please try directly connecting
your player to Ethernet.
“The network”
displays that no
server is
available.
No Internet connection.
Check if other network functions of the player are normal. If it is
certain that there are problems with “network” functions, please
refer to instructions on media server, to ensure that
configurations are correct.