1
DVB to IP streamers
sdi410C, sti410C, sda410C, sta410C, sai410C, saa410C
EN RU
Vers. 1.04
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled
or discarded according to applicable local and national regulations.
Equipment intended for indoor usage only.
This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN60065, RoHS norm EN50581.
This product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical
equipment“ CU TR 020/2011, “On safety of low-voltage equipment“ CU TR 004/2011.
This product is in accordance with safety standard AS/NZS 60065 and EMC standards of Australia.
1. Product description
DVB-S/S2 (sdi410C, sda410C), DVB-T/T2/C (sti410C, sta410C), DVB-ASI (sai410C, saa410C) to IP streamers (in text
- module) designed to broadcast in multicast on an IP network the services (TV or Radio programmes) issued from FTA or
encrypted digital reception; in case of encrypted signal, a CAM containing the operator's smart card must fit the slot. The IP
streams can be viewed using an IPTV set-top box or a software video player. Modules sda410C, sta410C, saa410C have
additional DVB-ASI output with unfiltered full transport stream.
Modules are intended for indoor use only.
2. Characteristics
Input: one DVB transport stream (MPTS).
Output: up to 24 simultaneous, IP-encapsulated services (TV or Radio programs), with individual multicast addresses
and one MPTS stream.
•
BISS descrambling (sda410C, sta410C, saa410C modules).
•
Information filtering of DVB tables.
•
UDP & RTP transmission protocols.
•
Web interface for configuration and setting.
•
SNMP agent for monitoring and alarms.
•
SAP & SDP protocols that facilitate automatic service selection on the user's STB and provide information to external
servers.
•
PID filtering.
•
PSI/SI parsing.
•
Transparent ECM & EMM messaging.
•
PAT, PMT and SDT table regeneration.
•
Routing or blocking for CAT, EIT, TDT tables.
•
Configurable QoS marking.
•
Configurable Time To Live.
3. Safety instructions
Installation of the module must be done according IEC60728-11 and national safety standards.
Any repairs must be made by qualified personnel.
Do not expose this module to moisture or splashing water and make sure no objects filled with liquids, such as vases,
are placed near or on the unit.
Avoid placing the module next to heat sources such as central heating components or in areas of high humidity.
Keep the converter away from naked flames.
If the module has been kept in cold conditions for a long time, bringing it into a warm environment may cause
condensation, so allow it to warm up for no less than 2 hours before plugging into the mains.
Ventilation should not be impeded by covering the module, such as newspapers, table-cloths, curtains etc.
Mount the module in a vertical position only. If installing in a 19” rack system additional forced air cooling fans may be
required (see table "
Technical specifications
" - operating temperature range).
Always allow 10 cm of free space from the top, front and bottom of the unit to enable any heat to be dissipated.
