Magnescale LH71A, Instruction Manual

Page: 95 / 338

LH71A / LH72
(E)
3-3
3-2. Rear Panel
No. Name Function
q
Measuring unit input 1/2/3 Performs measuring unit input for first, second and third axes
w
DC input terminal DC power input terminal
Note
Always use the special AC adaptor (sold separately). Using any other
adaptor could damage the counter unit or cause it to malfunction.
e
AC adaptor cable clamp Anchors the AC adaptor cable
r
Ground terminal Note
Use the included grounding wire when setting up the counter unit, and
always connect this terminal to the machine proper that you are setting
up.
t
Remote reset connector terminal Performs the same operation as the RESET key using an external signal
y
Touch sensor input (LH71A only) Used to make the datum point setting when the touch sensor (sold
separately) is connected
q
w e r t y
R E M O T E R E S E T T O U C H S E N S O R
3. Name and Function of Each Part