Magnescale LH71 Series, Instruction Manual

Page: 93 / 292

LH71
(E)
5-5
Power ON
Basic
settings
1-axis/2-axis model
3-axis
model
Detailed
settings
Model
Destination
country
Scaling
(1.000000)
Measuring unit
resolution
Minimum display
resolution
(Measuring unit
resolution)
Display switching
(1-1, 2-2, 3-3)
Axis label
switching
(1-X, 2-Y, 3-Z)
Compensation
value
(OFF)
Flicker control
(OFF)
Sleep
(OFF)
(Hold down for
approx. 3 s.)
(Lights up
→
flashes)
Standby key lamp
Approx.
2 seconds
Select axis
Use to select
Note 1
or
Select axis
Select axis
Performed for each axis.
Select axis
Performed for each axis.
Enter the setting value
or
For 2-axis and
3-axis models only
For 1-axis and
2-axis models only
Note 1: Pressing or cancels the changes
in the basic settings , and switches the
setting mode to detailed settings .
or
or
* The setting in parentheses ( ) is the factory setting.
* indicates the process when the setting does not
be changed.
Performed for each axis.
Use to select setting content
Use to select setting content
Use to expand the selection option.
Start of operation
(When the minimum display resolution is 0.001 mm)
*
When the segmented error compensation value is set, is displayed,
the unit switches to reference point acquisition mode.
Use and to select setting content
Performed for each axis.
Use to select setting content
Use to select setting content
Use to select the setting (compensation), and then set each option
Enter the compensation value
Enter the
compensation value Enter the
position
Select axis
Use to select setting content
Use to select setting content
1
2
3
4
5
6
7
8
9
!
5-2-2. Resetting the Basic Settings
(General-purpose Applications and Milling Machine Function)
When the basic settings are reset and finalized (FINISH), all detailed settings will revert to their factory default
settings.
1
Select
GENERAL
2
STD/US/JPN
3
0.1/0.5/1/5/10/
00.00.01/
00.00.10/
00.01.00/
00.10.00
<Expanded>
0.05/2/20/25/50/
100/01.00.00
4
Setting at
3
or
higher/Diameter
display at
3
(except for
angle)/Polarity
5
IN-1/IN-2/IN-3/
IN -
6
X/Y/Z
7
0.100000 -
9.999999
8
OFF/LIN Err/
SEG Err
* See Part 5-5,
“Compensation”.
9
OFF/1/2
!
OFF/1/5/10/30/
60
* If you have already entered the “detailed settings”, make a note of the
setting values before resetting or changing the “basic settings”.
5. Settings
LH71