IV. Function of Parts.
1. Sheet Key and Function of each key
D
Size Detection Key (35-2003 only)
This function is available with the mode 35-2003.
- Press
D
key. "D" appearing on the display indicates that this function is on.
- The counting speed is automatically set at SPEED - 2 when this function is
in use.
- Adjust the position of the Note Guides so that notes are centered in the
hopper. When setting these Guides, allow enough clearance to enable the
notes to move freely.
- When a note of different length is detected, the machine stops and
"dS1" appears on the display. Pressing of
+
ACCM
key can include the note into
the batch. Pressing of
0
CLR
key can exclude the note from the batch. The
remove the note from the staker.
- To turn the size check Function (length) off, press
D
key again.
NOTE
Manufacturer recommend users to set the 5mm detection level.
( = setting value : 0.010 )
Figure 6 : Note Length
6
Summary of Contents for 35-2003 Series
Page 1: ...Magner 35 2003 35 3 Series Currency Counter Operator s Manual...
Page 2: ......
Page 19: ...17 Magner 35 2003 35 3 Series...
Page 20: ...EHF 00069 012706...