Magner 35-2003 Series, Operator'S Manual

Page: 9 / 20

SP
Speed Selection Key
- Three counting speeds are available on this machine:
SP 1: Counts approximately 600 notes per minute.
SP 2: Counts approximately 1,200 notes per minute.
SP 3: Counts approximately 1,500 notes per minute.
- To display the counting speed, press
SP
key.
- To change the counting speed, press
SP
key again to the desired counting
speed. Once a speed has been selected, the machine will always goes back
to the selected setting until another change is made.
MAN.
AUTO
Manual/Auto Start Key
- This key sets the machine at either manual or auto start mode.
- To turn the manual start mode on, press the
MAN.
AUTO
key. "MAN" appearing
on the display indicates that this function is on. The machine does not start
automatically when notes are placed in the hopper. To start counting notes,
press
START
STOP
key.
- To turn the manual start mode off, press the
MAN.
AUTO
key. "MAN" on the display
goes out. The machine starts counting automatically when the notes are
placed in the hopper.
Numeric Keys (Variable Batch Setting Keys)
You can preset a desired number of notes, from o through 999, to be
counted in a batch before the machine pauses, so that the operator can
remove the notes.
NOTE
The factory default setting is 200.
7
Magner 35-2003 / 35-3 Series