Magner 35-2003 Series, Operator'S Manual, Page: 12 / 20

- Two stacker wheels ensure neat stacking of notes at all times.
5. Note Jam Release Lever
This lever is used to release the note(s) jammed inside the currency counter.
6. Thickness Adjustment Dial
- This dial is used for adjusting the gap between the feeding and separating
rollers so that only one note may pass through at a time.
- For new(thinner) notes, adjust to a lower number: 4, 3, 2 and 1
- For used(thicker) notes, adjust to a higher number. 6, 7, 8 and 9
- Should error signals, “dBL" or “CH”, occur frequently, turn the dial to the left
to adjust the gap for proper thickness.
7. Power Switch
- When the power switch is turned on, “8888" will appear on the display. The
machine will stop automatically after the start-up sequence is performed.
The display will show “0" which indicates the machine is ready for counting.
- If a "Sensor Error Code" (see page 10) appears on the display instead of
"0", take corrective actions in accordance with the instructions on page 12.
- The Power Switch should be turned “OFF” if the machine is not used for an
extended period of time.
8. Fuse
Use only recommended fuse: 2A
9. AC Input Receptacle
10. Interface Connector (RS-232C/option or External Display/option)
- As an optional part, the RS-232C interface is available to interface the
currency counter with PC.
- External display is also available as an optional part.
11. Voltage Selection Switch
Please make sure that switch is set at the correct position for the available
voltage.
USA, Canada & Mexico : 120V
European countries & others : 230V
10