MAINTENANCE
3. Tum the assembly over and remove the phillips screw (3) from the center of the
RF/power supply card (4).
4. Grasp the RF/power supply card (4) at the sides with one hand and lift it gently to
separate the circuit card from the molded plastic chassis (6).
Table 5. Receiver Parts List
Figure & Part Number Quantity
Index No. {
1 Housing Screw Ref 4 {
2 Clam Shell Housing Case Ref 2 {
3 Circuit Card Assembly Screw Ref 2
{ 4 RF/Power Supply Circuit 819822-801/802 1 {
{ 5 Antenna Input Connector Ref 1 {
6 Chassis Ret 1
{ 7 Hex Standoff Ref 1 set {
{ 8 Power Cable Assembly Ref 1 {
9 Ftear Panel Ref 1 {
10 EMI Shield Ref 2 j
11 MULTI-PORT Interface Connector Ret 1 {
12 1PPS Connector Ret 1 {
13 Mounting Platform Rei 2 {
14 Processor Circuit Card Assembly 819978-80X 1 ;
{ 15 Light Emitting Diode Ref 3 {
{ 16 Front Panel Ref 1
{ 17 Header, 16 pin Ret 1
Ref. - Refer to parts list for the assembly, of which the item is a part.
22
