background image

-2-

EN

The lightning flash with arrowhead symbol, within an 

equilateral triangle, is intended to alert the user to the 

presence of uninsulated “dangerous voltage” within the 

product’s enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in 

the literature accompanying the appliance.

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to 

possible eye injury.

CAUTION:

 

 USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN 

THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:

 

 VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT 

STARE INTO BEAM.

LOCATION:

 

INSIDE, NEAR THE DECK MECHANISM.

 WARNING

:  

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 

THIS APPLIANCE TO RAIN OR MOISTURE.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference 

by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

  FCC WARNING-

 This equipment may generate or use radio frequency energy. Changes or modifications to this 

equipment may cause harmful interference unless the modifications are expressly approved in the manual. The 

user could lose the authority to operate this equipment if an unauthorized change or modification is made.

  CAUTION:  TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

  ATTENTION:  POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE 

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

 A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with 

your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning 

chemical wastes.

Precautions

Laser Safety

  Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special wastes.

  Contact your council for details.

  CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

For Customer Use:

Read carefully the information located at the bottom of this unit and enter below the Model No. and the Serial No. Retain 

this information for future reference.
Model No.

Serial No. 

Precautions

MWD200G_E6AA0UD_1UH_V2.indd   2

2006/05/08   11:04:49

Summary of Contents for MWD200G





















Reviews: