3
2
Battery Installation
1. On the back of the remote,
push down on the tab and
lift the cover off.
2. Match the batteries to the +
and - marks inside the
battery case, then insert 2
AAA Alkaline batteries.
3. Press the battery cover
back into place.
Battery Saver
Your remote automatically turns
off if the buttons are depressed
more than 30 seconds. This will
save your batteries should your
remote get stuck in a place
where the buttons remain
depressed (e.g., between the
sofa cushions).
Code Saver
You will have up to 10 minutes to change the batteries in
your remote without losing codes you have programmed.
However, do not press any buttons until batteries are
installed in the remote. If buttons are pressed without
batteries in the remote, all codes will be lost.
Code Setup
The
CODE SEARCH
button is used to setup the
remote. You can either setup the remote using the code
for your brand of product, from the code tables, or you
can search through the library of codes until you find a
code that works for your product.
Setup
Introduction
Table of Contents
CHAN+
MUTE
VOL
+
CC
CODE SEARCH
Congratulations on your purchase of a Magnavox
Universal TV Remote Control. Magnavox
Universal Remotes let you replace a broken or
lost remote or combine more than one remote into
one.
This remote control operates the common features
of most but not all models and brands of IR
Infrared Controlled TVs. This remote may
provide functions that are not available on your
TV. Some functions of your particular TV (e.g.
menu functions) may not be controlled by this
remote. In such cases, use the original remote
control for your equipment. Please use this manual
to become familiar with your Magnavox Universal
TV Remote. After you are familiar with your
remote the first thing you need to do is to install
batteries and setup your remote for your particular
TV brand.
Thank you for buying a Magnavox remote and we
hope it will give you many years of service.
Introduction ...................................................... 2
Setup ............................................................... 3
Battery Installation ....................................... 3
Battery Saver ............................................... 3
Code Saver ................................................. 3
Code Setup ................................................. 3
Button Functions ............................................... 4
Code Entry ....................................................... 5
Direct Code Entry ........................................ 5
Code Search ............................................... 5
Code Identification Feature .......................... 6
Sleep Timer ...................................................... 6
Troubleshooting ................................................ 7
Instrucciones en Español ................................... 8
Code List ....................................................... 14
MRU4100-OM(MX010)_H14112A.pmd
10/12/2007, 3:47 PM
2-3
