5
4
Direct Code Entry
1. Press and hold the
CODE SEARCH
button until the
red indicator stays on, then release the
CODE
SEARCH
button.
2. Enter the 4 digit code from the code table. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
3. With your device on, press
CHANNEL UP
. If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.
Code Entry
Write your code down here for easy reference later.
Code
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G.
PREV CHAN
may be called RECALL,
or
ENTER
may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have
PREV CHAN
ability for the
PREV CHAN
button to operate this
feature.
Button Functions
CHAN+
MUTE
VOL
+
CC
1
2
3
4
5
6
7
8
9
ENTER
SLEEP
0
VOLUME UP/
DOWN
Changes
the volume level of
the product,
normally the TV.
CHANNEL UP/
DOWN
Changes the
channels.
PREV CHAN
Returns to the
previously selected
channel.
SLEEP
Turns off the
TV after a period of 1
to 99 minutes.
ENTER
Used after direct
channel number
entry to immediately
change to the
selected channel.
NUMBERS
Enter numbers for direct
channel selection. Some
products require Enter to
be pressed after channel
selection.
MUTE
Turns off the
TV sound while the
picture remains.
Red Indicator
Lights when
any button is
pressed.
CC (Closed Caption)
TV Closed Caption
(if your TV has this
feature).
CODE
SEARCH
Used for setup
Programming with Code Search
If your TV does not respond after you have tried all the
codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.
1. Manually turn on the TV to be controlled.
2. Press and hold the
CODE SEARCH
button until the
red indicator stays on, then release the
CODE
SEARCH
button.
3. Press the
CHANNEL UP
button repeatedly (up to
300 times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the
CHANNEL DOWN
button
to backtrack through the library until the device
changes channel. Pressing
CHANNEL UP
changes
direction to forward again.
4. Press and release
MUTE
to install the code.
Note
: Code Search starts from the currently stored 4
digit number.
MRU4100-OM(MX010)_H14112A.pmd
10/12/2007, 3:47 PM
4-5
