Magnavox H2160MW9 A, Owner'S Manual

Page: 30 / 256

28 EN 28 EN
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
1
Follow the procedure in “Finding the
Viewing Channel on Your TV” on
page 22 to display “Initial Setup”
menu.
2
Use [
K
/
L
] to select your desired
language, then press [OK].
Initial Setup
OSD Language
English
Français
Español
3
Use [
K
/
L
] to select the type of
broadcasting signal, then press [OK].
Initial Setup
Auto Preset will scan all terrestrial channels.
This may take a while to complete.
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
Auto Presetting Now
CH 1
4
If a PBS (public broadcasting station) is available
in your area, clock setting will automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then complete.
Press
[RETURN] to exit.
If a PBS (public broadcasting station) is not
available in your area, press
[OK] . Then proceed
to step 5 in “Manual Clock Setting” on page 33.
OPEN/
CLOSE SOURCE
HDMI
.@/: ABC
GHI
PQRS TUV
SETUP REPEAT
DISPLAY
AUDIO
DISC MENU
RETURN
TITLE
WXYZ
CLEAR SPACE
JKL MNO
DEF
OK
DVD HDD
D.DUBBING
V.REPLAY V.SKIP
RAPID PLAY
REC REC MODE TIMER
DTV/TV STANDBY-ON
CHANNEL
OK
RETURN
E2S00UD_H2160MW9_EN_v1.2.indd 28 E2S00UD_H2160MW9_EN_v1.2.indd 28 2009/02/02 18:08:15 2009/02/02 18:08:15