Magnavox H2160MW9 A, Owner'S Manual

Page: 77 / 256

75 EN 75 EN
Recording
Playback
Basic Setup
Connections
Editing
Introduction
Function Setup
Others
Español
Program Playback
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press
[STOP
C
] twice
during program playback. “OFF” appears on the TV
screen.
• Program information will be retained until you turn
the unit to the standby mode or open the disc tray.
• You may also select a desired track using [the
Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to the standby mode automatically
when you start program playback.
You can program the disc to play back in your desired
order.
1) Press [SETUP].
2) Use [
K
/
L
] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
3) Use [
K
/
L
] to select “Program Play”, then press
[OK].
4) Use [
K
/
L
] to select a desired track, then press [OK]
or [
B
].
DISC Playback Mode
Program Play
0:00:00 Total
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Repeat this step until you program all the desired
tracks.
5) Press [PLAY
B
].
DISC Playback Mode
Program Play
0:31:07 Total
09 04 10 06 -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Program playback will start.
SPECIAL PLAYBACK
By playing back the autostart recording, you can pause
or go back the TV program you are currently watching.
For the autostart recording refer to “AUTOSTART
RECORDING” on page 45.
To pause and resume the TV program:
1) When watching TV program through this unit’s
tuner, press [PAUSE
F
].
TV program will be paused and sound will be muted.
2) Press [PLAY
B
] to resume the TV program you were
watching from where you have paused.
To go back the TV program:
When watching TV program through this unit’s
tuner, press [
H
], [
E
] or [V.REPLAY].
• While playing back the autostart recording, pressing
[
H
] or [
G
] skips playback point 5 minutes
backward or forward.
To go back to the specific time:
1) When watching TV program through this unit’s
tuner, press [DISPLAY], then press [OK].
2) Use [
K
/
L
/
{
/
B
] or [the Number buttons] to
enter a desired time, then press [OK].
• While playing back the autostart recording, press
[STOP
C
] to cancel the playback.
• When watching TV program or while playing back the
autostart recording, press [DISPLAY] once to display
the autostart recording information. Refer to
“Autostart Recording Information” on page 23.
• Noise reduction, zoom and virtual surround functions
are available while playing back the autostart
recording.
Playing Back the Autostart Recording
Note
• While playing back the autostart recording, you
cannot change the channels.
• While playing back the autostart recording, you
cannot change the DTV audio language.
• If you change to DVD mode or if the timer recording
starts while playing back the autostart recording, the
playback will be stopped.
• When this unit turns on for the timer recordings, the
autostart recording will not be performed.
• For the contents of the autostart recording, you
cannot change the TV audio.
E2S00UD_H2160MW9_EN_v1.indd 75 E2S00UD_H2160MW9_EN_v1.indd 75 2008/11/20 12:57:47 2008/11/20 12:57:47