Magnaflux CSV Series, Operation Manual, Page: 49 / 66

Revised January 2020
www.magnaflux.com
Page | 3-22
To create a particular recipe, use the green up and down arrows on the left side of the screen, and stop at the
particular recipe number that is desired. Once that recipe number is highlighted, push on the white box, and a
keyboard will appear. Type in the name of the recipe, and then press Enter. A close-up of this section of the
screen is shown in Figure 3-39 below.
Figure 3-39
After the recipe name is set, the settings for each output need to be set-up. This is done by pushing on the
various boxes OUTPUT OFF or FULL WAVE, shown in Figure 3-40 below, as well as setting the percentages
for Mag Power, Demag Power, and Mag Shot Time.
Figure 3-40