Magnaflux CSV Series, Operation Manual, Page: 14 / 66

Revised January 2020
www.magnaflux.com
Page | 2-6
Figure 2-7
With the MANUAL ON button lit, the operator would then push the Cycle 1 ON button located on the bottom
right section of the main screen. This is shown in Figure 2-8 below. This sets the unit so that only one cycle
will be performed after the Mag button is pushed. The cycle is dependent on which outputs are turned on and
off, which will be detailed next in the manual.
Figure 2-8
Next, the operator will connect a minimum of
30’ of 1000 MCM for CSV-10 or 30’ of 1000 MCM in parallel with
double 30’ 4/0 for CSV-15 to the bus bars on output 1 shown in Figure 2-9.