Magnaflux CSV Series, Operation Manual, Page: 21 / 66

Revised January 2020
www.magnaflux.com
Page | 2-13
Figure 2-22
After initiating a magnetizing shot, the operator would then push green DEMAG button (Optional Feature for
Output 2) located on the main screen, which is located in the bottom center of the screen, and shown below in
Figure 2-23. During demagnetization, a message will appear as shown in Figure 2-24 below. Once the
demagnetization cycle is complete, the message will disappear, and the main screen will appear again.
Figure 2-23
Figure 2-15
Figure 2-24
Figure 2-15