14
Step 7: Remote Feature Programming
When the security system control module learns the transmitter operating code, a specific group of
operating features are automatically programmed to a default setting. These default settings can be
changed by following the enclosed procedure and using the consumer transmitter for programming.
#
Programmable Alarm Feature
Default Setting
1
Chirp Status Indicator
On
2
Last Door Closed Automatic Arming
Automatic Arming of Alarm “Off”
3
Silent Arming from 3-Button Transmitter’s Aux Button
Off
4
Safety Illumination Sentinel System
Off
R
☛
Disarm the Security
System
The LED will be off and the horn/siren
will emit 2 chirps
S t e p 2
S t e p 3
Turn On the Ignition
The LED will remain off.
ON
OFF
ON
OFF
ON
Make Sure the Valet/Override Switch is in the
“Off” Position
S t e p 1
Switch in
“Off” Position
Switch in
“On” Position
Valet/Override Switch
Switch the Valet Switch
On then Off 6 Times
The LED will be on solid and the horn/siren will emit
1 long then 1 short chirp. You are now in the
“Remote Feature Programming” mode.
S t e p 4
6x