12
Step 6: Transmitter Programming
Plug In the Power
Harness
The horn/siren will start sounding, the
parking lights will flash and the LED
will begin flashing
S t e p 2
ON
S t e p 3
Turn On Ignition
OFF
ON
OFF
ON
Make Sure the Valet/Override Switch is in the
“Off” Position
S t e p 1
Switch in
“Off” Position
Switch in
“On” Position
Valet/Override Switch
Switch the Valet Switch
On then Off 1 Time
The horn/siren will stop sounding, the
parking lights will stop flashing
S t e p 4
Switch the Valet Switch
On then Off 2 Times
The horn/siren will chirp 1 time. You
are now in the transmitter code
programming mode. The LED will be a
solid RED
S t e p 5
1x
2x