10
Step 7: Remote Feature Programming
A specific group of operating features are automatically programmed to a default setting. These default
settings can be changed by following the enclosed procedure and using the consumer transmitter for
programming.
#
Programmable Alarm Feature
Default Setting
1
Chirp Status Indicator
On
2
Last Door Closed Automatic Arming
Automatic Arming of Alarm “Off”
3
Ignition Key Controlled Door Lock/ Unlock
Off
OFF
ON
OFF
ON
Make Sure the Valet/Override Switch is in
the “Off” Position
S t e p 1
Switch in
“Off” Position
Switch in
“On” Position
Valet/Override Switch
R
☛
Disarm the Security System
The LED will be off and the horn/siren will
emit 2 chirps
S t e p 2
☛
R
☛
☛
S t e p 9
Turn Off the Ignition
The horn/siren will emit 1 short chirp
and 1 long chirp. You are now out of
the consumer transmitter code
learning mode. The LED is off.
To Code #2 Button Switch
the Valet Switch
On then Off 1 Time
The LED will be solid red and the
horn/siren will chirp 1 time.
S t e p 7
1x
Push the “#2” Button
The LED will begin flashing slowly and the horn/siren will chirp 2 times.
S t e p 8
OFF
Step 6: Transmitter Programming
