Magmaweld PROSTICK 200i, User Manual

Page: 16 / 96

16
www.magmaweld.com
proSTICK 200i
EN
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
Current Setting Button
• Welding current is set between 5-200A in all welding modes with the current
adjustment knob. The value set by turning left and right will be monitored on the
digital display.
• You can switch between the current and voltage values at the time of welding or in idle
position by pressing the current adjustment button.
• Switch to the VRD menu by pressing the current adjustment button for 3 seconds.
VRD menu is described under the VRD section.
Digital Display
• Welding current, welding voltage and other parameters can be monitored.
Welding Mode Selection Key
• Used for selecting one of MMA-CEL-SPOT-TIG welding modes. Press the button once to
switch to the other welding mode. The led of the selected mode will be lit.
Cellulosic Electrode Mode
• Cel mode is selected by using the Menu button and the relevant led will light when
this mode is selected. If cellulosic electrode welding will be done, welding connections
must be made correctly and CELL mode should be selected.
MMA Mode
• MMA mode is selected by using the Menu button and the relevant led will light when
this mode is selected. MMA mode should be selected when welding of rutile and basic
electrodes is desired.
3.1 User Interface
OPERATION
Operation