EN
30
www.magmaweld.com
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
monoTIG 220ip / 220ipw / 220ip AC-DC / 220ipw AC-DC
3.3 Machine Features
Thermal Protection
• Double protection to prevent overheating and damage of your machine. The intelligent processor digitally
performs temperature control whereas a second protection for the machine will be performed manually.
• If the Igbt block rises above 80 degrees, the red LED lights and the error code will be displayed.
Lift TIG
• Lift TIG function allows TIG to be made without damaging the Tungsten tip while rubbing it.
Operation With Generators
• Suitable for operation with generators. The kVA operating value should be determined by referring to the technical
specifications.
Smart Fan Control
• You can tell if the fan is running by the fan sound at first power-up.
• If the fan sound is comes when the machine is turned on, this means the fan is running. After a time machine exits
from test mode.
• When the ambient temperature is below 30 degrees, the fan does not start and will be in standby mode.
This prevents dust or metal parts from entering the machine.
Program Memory
• 100 programs can be stored in the memory. You can record 100 programs between 0-99.
• The changes will be saved. Press the P key to switch between programs.
Voltage Protection
• Tolerates voltage fluctuations.
• Protection feature against false voltage and oscillating input voltage.
• After the ambient conditions have returned to normal, the machine functions will also be activated.
Protection
• If the mains voltage is above 250 V or below 185 V, the system issues an error code and a warning LED is displayed.
• Machine functions will be re-activated when the phases are corrected.
Antistick
• Anti-Stick feature to prevent electrode sticking
Operation
coldTIG
• It is used to reduce heat input and join thin materials. The heating time of the workpiece is very short and the weld
pool temperature is much lower than other welding applications. Burr-free, high-quality, bright weld seams are
obtained. It can only be used in DC mode. It is not active in AC mode.
