EN
27
www.magmaweld.com
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
monoTIG 220ip / 220ipw / 220ip AC-DC / 220ipw AC-DC
Voltage Reduction
• It ensures that the idle voltage (voltage between the output terminals) is reduced below 12V
when the machine is running and no welding is performed.
• It may be required within the framework of occupational health and safety rules.
• Applies in electrode welding modes.
• Activate or deactivate by pressing the button. The LED will light when active.
TIG Mode;
• With its 100 program memory feature, it can save your parameter settings. You can recall them as
required by your work type. By this means, each time you change the work, you will not have to set
parameters; the production standard will be preserved. Whichever memory (job) number is
selected, all settings will automatically be saved in that number.
• Change the program number for different parameter entries.
• The display above the program button shows which parameter you have changed in the program.
• There are 100 programs available between 0-99.
• You can switch to the other program by pressing the program button once, if you press and hold, you
can switch between the programs quickly.
MMA Mode;
• (U) When you want to see the welding output voltage, you can see the voltage unit by pressing the
button once. You can switch to the ampere unit by re-pressing the button and display the current
value (A) on the digital display.
8- Program Memory
9- Digital Display
The set welding current, parameter values and error codes can be monitored visually on the digital
display.
7- AC Frequency and Balance Adjustment
Press the button once to switch between the parameters. These keys are available only on AC/
DC models. Adjustment is made with the adjustment knob.
AC Frequency
• Used to adjust the output frequency of the AC output poles when AC mode is active in TIG
welding mode.
• Allows adjustment between 5-150 Hz.
• The factory default setting is 60 Hz.
• By this function, it is easier to break the oxide layer of the material.
AC Balance Adjustment
• AC determines how fast the pole change will occur.
• Allows amplitude adjustment when the AC mode is active in TIG welding.
• Has a setting range of 10-90%.
• By this function, the breakage of the oxide layer and the smoothness of the welding seam
after breakage will be finely adjusted according to the material thickness and tungsten
diameter.
• The default factory setting is 35%.
• Will be replaced depending on the workpiece thickness and user request.
Example;
Let AC balance be set to 35% welding and penetration will be provided at 65% and at alu
-
minum oxide will be cleaned 35% .
Operation
