Magmaweld Monostick 200i, User Manual

Page: 11 / 40

11
www.magmaweld.com USER MANUAL | KULLANIM KILAVUZU
monoSTICK 200i
EN
7
8
9
1
2
3
4
5
6
TECHNICAL INFORMATION
1.1 General Information
monoSTICK 200i is an inverter type portable, mono-phase DC MMA welding machine designed to weld stick
electrodes up to 4 mm. Even though the machine is mono-phase, due to the inverter technology it provides
stable arc and good re-striking performance, also the electric consumption is approximately 10% less than
the silicon controlled rectifier equipments and 25% less than the magnetically controlled equipments.
monoSTICK 200i proved well that it can work between 185 to 250 V 50/60 Hz line voltages. Therefore this
machine is quite immune to mains voltage fluctuations and perfectly welds with generator-sets.
monoSTICK 200i can also be used with long welding cables up to 25 mt. The machine is fan cooled and
thermally protected against over heating.
Figure 1: monoSTICK 200i
1.2 Machine Components
Technical Information
1-
Handle
6-
Earth Cable and Welding Cable (+)
2-
Thermic / Error Led
7-
Fan
3-
Current Adjustment Pot
8-
Line Cable Inlet
4-
Earth Cable and Welding Cable (-)
9-
Power Switch
5-
Power Led