EN
www.magmaweld.com
22
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
SMART SERIES / SMART SERİSİ
Welding mode is selected. Each press of the button enables a transition between the lines in the relevant column. When the welding mode is selected,
the relevant led will light.
If you want to see which value the machine originally recommends and return to that value, simply press the adjustment button once.
Pulse MIG/MAG welding method is only available in models with pulse.
When Pulse MIG / MAG) welding method is selected as the welding method, the modes are as follows:
3-) WELDING MODE SELECTION
The choice you make from the method tab in the bag creates a differentiation in the welding mode options. When MIG / MAG welding method is
selected as the welding method, the modes are as follows:
Setting Range
• Classic Mode
• Smart Mode
• Synergic Mode
CLASSIC MODE
When selected, you can adjust your wire speed
and welding voltage in certain tolerance value
ranges. Wire speed will be adjusted between
1-24 m/min, welding voltage will be adjusted
between 15-40 V.
SMART MODE
When selected, welding parameters such as wire
type, wire diameter, gas type must be selected
correctly. The machine will automatically adjust
the optimum voltage according to the selected
welding current. You can adjust the voltage by
turning the adjustment knob in the +/- direction
within a certain tolerance range.
SYNERGIC MODE
When selected, welding parameters such as wire
type, wire diameter, gas type and thickness must
be selected correctly. Both the current and the
voltage will be automatically adjusted
according to the selected welding parameters.
The user can navigate both in the current and
voltage within a certain tolerance range. The
machine will automatically recalculate the
voltage according to the current value set at
the specified tolerance.
When MMA and Lift TIG welding are selected as welding methods, there is no selection in the mode section.
CLASSIC MODE
When selected, you can adjust your wire speed
and welding voltage in certain tolerance value
ranges. Wire speed will be adjusted between
1-24 m/min, welding voltage will be adjusted
between 15-40 V.
SMART MODE
When selected, welding parameters such as wire
type, wire diameter, gas type must be selected
correctly. The machine will automatically adjust
the optimum voltage according to the selected
welding current. You can adjust the voltage by
turning the adjustment knob in the +/- direction
within a certain tolerance range.
SYNERGIC MODE
When selected, welding parameters such as wire
type, wire diameter, gas type and thickness must
be selected correctly. Both the current and the
voltage will be automatically adjusted
according to the selected welding parameters.
The user can navigate both in the current and
voltage within a certain tolerance range. The
machine will automatically recalculate the
voltage according to the current value set at
the specified tolerance.
Operation
Summary of Contents for ID 500 M PULSE SMART
Page 159: ......
