EN
www.magmaweld.com
19
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
SMART SERIES / SMART SERİSİ
3.1 Settings in the Bag
1
2
3
4
5
6
As long as the button is pressed, the wire is driven and the gas valve does not work. You can use this button to drive the wire into the torch.
As long as the button is pressed, gas flow is ensured and wire feed does not work. You can use this button after gas change.
Welding method is selected. Each press of the button enables a transition between the lines in the relevant column. When the welding method is
selected, the relevant led will light.
1-) WIRE FEEDING
2-) GAS FLOW
3-) WELDING METHOD SELECTION
Setting Range
•
MIG/MAG
• Pulse MIG/MAG
Pulse welding method is only available in models with pulse. In no pulse( W/O Pulse) models, when this line is reached, the LED will
not light and Pulse will not be active.
According to the welding method chosen Ve you need to adjust your connections and accessories. There is a separate outlet for the
MMA method in front of the machine.
• MMA
In Lift TIG welding method, suitable apparatus should be used for torch connector connection. Thanks to the special apparatus, it
will be compatible with the Euro connectore.
• Lift TIG
OPERATION
Operation
Summary of Contents for ID 500 M PULSE SMART
Page 159: ......
